Victron Energy Blue Smart IP65 XLR Adapter

BPC900100004XLR

Stock: In Stock!

RRP $29.95

$26.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XLR 3-pin connector with fuse is an accessory of the Blue Power & Blue Smart IP65 Charger with DC connector.

Suitable for use with mobility aids and scooters using VECIP65-24/5 and VECIP65-24/8 Battery chargers

Specifications

Weight (kg): 0.4
Warranty: 1 Year

Victron Energy Blue Smart Charger IP65 24V 5A

BPC240531014R

Stock: In Stock!

RRP $192.50

$173.25

Estimate Shipping Cost

Quantity

Postcode

Description

  • Water, dust and chemical resistant
  • Seven step smart charge algorithm
  • Recovery of fully discharged ‘dead’ batteries
  • Automatic power supply function
  • Automatic compensation for high or low temperature
  • Several other battery life enhancing features
  • Low power mode to charge smaller batteries
  • Li-ion battery mode
  • Setup and configure, readout of voltage and current by Bluetooth Smart (with VictronConnect app)

Ultra high efficiency “green” battery charger

With up to 95% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Durable, safe and silent

  • Low thermal stress on the electronic components.
  • Protection against ingress of dust, water and chemicals.
  • Protection against overheating: the output current will reduce as temperature increases up to 60°C, but the charger will not fail.
  • The chargers are totally silent: no cooling fan or any other moving parts

Reconditioning

A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.

Recovery function for fully discharged batteries

Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Smart Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.

Specifications

Volts: 24
Length (mm): 47
Width (mm): 95
Height (mm): 190
Weight (kg): 1
Application: Battery Charger
Warranty: 5 Years

Additional Information

Baintech 6 Way Switch Panel - BTSWITCH6

BTSWITCH6

Stock: In Stock!

RRP $190.00

$171.00

Estimate Shipping Cost

Quantity

Postcode

Description

Powering different devices when you're away in a 4WD can be a challenge. Switch panels offer a solution. Allowing easy access to power fridges, lights and all your devices. The Baintech blue LED 6 Way Switch Panel features a Ciga socket, double 2.1a USB and Volt/Amp meter. Pre-wired for easy installation, the Baintech range of switch panels are customisable, with rocker switch labels to suit your set up.

With the built in volt meter, you can see exactly what state your batteries are in, when you're using them, rather than being out of sight and mind and running the risk of going flat as your fridge and lights run into the night. Stop having to pick and choose what stays and what goes. Set yourself up with a power panel featuring a range of different sockets today, so everything gets to come along on your next 4WD adventure.

Suitable for 4WD, Caravan, Marine applications

  • Aluminium panel
  • Panel size: 180mm x 110mm
  • 1 X Ciga socket
  • Dual USB (2x 2.1A)
  • 1 X Voltmeter
  • 15A Fuse Holders
  • Waterproof 1P68 rating
  • 6 X Customisable rocker switchs
  • Indication labels included
  • 12 month warranty
  • Panel dimensions: 180mm x 110mm 
  • Corner securing holes 4mm dia for countersunk screws
  • Mounting holes 7.5mm x 7.5mm in from each edge

Depth of entire panel with wiring, sockets and switches - allow 70mm minimum. Rear panel space allowance from outside edge to socket hardware is 10mm circumference all four sides.

Specifications

Length (mm): 180
Width (mm): 110
Height (mm): 70
Weight (kg): 2
Application: 4WD, light commercial vehicles.
Warranty: 1 Year

Baintech 4 Way Switch Panel - BTSWITCH4

BTSWITCH4

Stock: In Stock!

RRP $114.00

$102.60

Estimate Shipping Cost

Quantity

Postcode

Description

Powering different devices when you're away in a 4WD can be a challenge. Switch panels offer a solution. Allowing easy access to power fridges, lights and all your devices. The Baintech blue LED 4 Way Switch Panel features a Ciga socket and Volt meter. Pre-wired for easy installation, the Baintech range of switch panels are customisable, with rocker switch labels to suit your set up.

With the built in volt meter, you can see exactly what state your batteries are in, when you're using them, rather than being out of sight and mind and running the risk of going flat as your fridge and lights run into the night. Stop having to pick and choose what stays and what goes. Set yourself up with a power panel featuring a range of different sockets today, so everything gets to come along on your next 4WD adventure.

Suitable for 4WD, Caravan, Marine applications

  • Aluminium panel
  • Panel size: 131mm x 120mm
  • 1 x Ciga socket
  • 1 x Voltmeter
  • 4 x Customisable rocker switches
  • Includes indication labels
  • 12 month warranty
  • Dimensions: 131mm L X 120MM W X 6mm Thickness (Allow minimum of 70mm for depth of entire panel)
  • Corner securing holes 4mm diameter for countersunk screw
  • Mounting holes 8mm x 8mm in from each edge

Specifications

Length (mm): 131
Width (mm): 120
Height (mm): 70
Weight (kg): 1
Application: 4WD, light commercial vehicles.
Warranty: 1 Year

Baintech 3 Way Switch Panel - BTSWITCH3

BTSWITCH3

Stock: In Stock!

RRP $98.00

$88.20

Estimate Shipping Cost

Quantity

Postcode

Description

Powering different devices when you're away in a 4WD can be a challenge. Switch panels offer a solution. Allowing easy access to power fridges, lights and all your devices. The Baintech blue LED 3 Way Switch Panel features a Ciga socket and Dual USB (4.2) + 3 customisable rocker switches. Pre-wired for easy installation, the Baintech range of switch panels are customisable, with rocker switch labels to suit your set up.

Suitable for 4WD, Caravan, Marine applications

  • Aluminium panel
  • Short circuit/overheat protection for on-off rocker switch
  • Suitable for both 12v and 24v systems
  • Panel is pre-wired
  • Voltage 12v-24v DC
  • Circuit breaker, overload protected
  • Size: 100mm x 110mm
  • Dual USB Socket (2x 2.1A)
  • 1x Ciga Socket
  • 12 month warranty

Dimensions: 100mm L X 110mm W X 3mm thickness (Depth of entire panel with wiring, sockets and switches - allow for minimum 70mm.)

Corner securing holes 4mm diamater for countersunk screw

Specifications

Length (mm): 100
Width (mm): 110
Height (mm): 70
Weight (kg): 1
Application: 4WD, light commercial vehicles.
Warranty: 1 Year

Energizer Lithium AAA 2Pk - L92-BP2

L92-BP2

Stock:

RRP $12.95

$10.95

Estimate Shipping Cost

Quantity

Postcode

Description

Lithium-Iron Disulfide.

Specifications

Volts: 1.5
Ah: 1.25
Length (mm): 44
Width (mm): 10
Weight (kg): 0.78
Application: Digital Camera, Toy, Game, Instrument, Electronic

Additional Information

Lithium battery ideal for high drain devices such as digital cameras. Outlasts alkaline batteries in such devices by up to 6 times.

Energizer Lithium AAA 4Pk - L92-BP4

E92-BP4

Stock:

RRP $22.95

$20.66

Estimate Shipping Cost

Quantity

Postcode

Description

Lithium-Iron Disulfide.

Specifications

Volts: 1.5
Ah: 1.25
Length (mm): 44
Width (mm): 10
Weight (kg): 0.78
Application: Digital Camera

Additional Information

Lithium battery ideal for high drain devices such as digital cameras. Outlasts alkaline batteries in such devices by up to 6 times.

Energizer A23 Alkaline Battery 1Pk - A23-BP1

A23-BP1

Stock: In Stock!

RRP $5.95

$3.95

Estimate Shipping Cost

Quantity

Postcode

Description

Suitable for various garage door remotes, security gate remotes and door bell buzzers.

Specifications

Volts: 12
Length (mm): 28
Width (mm): 10
Weight (kg): 0.08
Application: Remote Controls

Energizer AAAA Alkaline 2Pk - E96-BP2

E96-BP2

Stock: In Stock!

RRP $8.95

$7.95

Estimate Shipping Cost

Quantity

Postcode

Description

Energizer Alkaline AAAA size Battery - 2 pack

Specifications

Volts: 1.5
Length (mm): 42
Width (mm): 8
Weight (kg): 0.6
Application: Radio, Wireless, Torch,Toy, Game, Instrument, Electronic

Remco 12V 140Ah AGM Deep Cycle Battery - RM12-140DC

RM12-140DC

Stock: 1 Day

$549.00

Estimate Shipping Cost

Quantity

Postcode

Description

Purpose Built to handle the demanding requirements of repeated deep cycle use, the REMCO Deep Cycle range are the ideal replacement solution for applications such as Recreational, Mobility, Communications, Marine & RV use, Etc.

Specifications

Volts: 12
Ah: 140
Length (mm): 483
Width (mm): 170
Height (mm): 239
Weight (kg): 43.8
Application: Deep Cycle
Warranty: 1 Year

Victron Energy VE.Bus BMS - BMS300200000

BMS300200000

Stock: In Stock!

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

The VE.Bus BMS protects each individual cell of a Victron lithium iron phosphate (LiFePO4 or LFP) battery. 

Each individual cell of a LiFePO4 battery must be protected against over voltage, under voltage and over temperature.
Victron LiFePO4 batteries have integrated Balancing, Temperature and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets.

The BTVs of several batteries can be daisy chained. Up to ten batteries can be paralleled and up to four batteries can be series connected (BTVs are simply daisy-chained) so that a 48V battery bank of up to 3000Ah can be assembled.

Specifications

Volts: 12/24/48
Length (mm): 260
Width (mm): 120
Height (mm): 65
Weight (kg): 2
Application: Battery Management
Warranty: 5 Years

Additional Information

The BMS will:

  • shut down or disconnect loads in case of imminent cell under voltage
  • reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below), and
  • shut down or disconnect battery chargers in case of imminent cell overvoltage or over temperature.

Protects 12V, 24V and 48V systems
The operating voltage range of the BMS: 9 to 70V DC.

Communicates with all VE.Bus products
The VE.Bus BMS connects to a MultiPlus, Quattro or Phoenix inverter with a standard RJ45 UTP cable.

Other products, without VE.Bus can be controlled as shown below:

Load Disconnect
The Load Disconnect output is normally high and becomes free floating in case of imminent cell under voltage. Maximum current: 2A.
The Load Disconnect output can be used to control

  • the remote on/off of a load, and/or
  • the remote on/off of an electronic load switch (Battery Protect)

Charge Disconnect
The Charge Disconnect output is normally high and becomes free floating in case of imminent cell over voltage or over temperature. Maximum current: 10mA.
The Charge Disconnect output can be used to control

  • the remote on/off of a charger and/or
  • a Cyrix-Li-Charge relay and/or
  • a Cyrix-Li-ct Battery Combiner

LED indicators

  • Enabled (blue): VE.Bus products are enabled.
  • Cell>4V or temperature (red): charge disconnect output low because of imminent cell over voltage or over temperature.
  • Cell>2,8V (blue): load disconnect output high.

Victron Energy Lynx Ion Control - LYN010100100

LYN010100100

Stock: Call

RRP $486.20

$437.58

Estimate Shipping Cost

Quantity

Postcode

Description

Remote Control Panel for Victron Energy 24V battery system (Lynx Ion).

Specifications

Volts: 24
Length (mm): 100
Width (mm): 110
Height (mm): 39
Weight (kg): 0.5
Application: Battery System Monitoring
Warranty: 5 Years

Additional Information

The Ion Control shows all vital data from the Lithium Battery system:

  • Battery voltage (V)
  • Battery charge/discharge current (A)
  • Ampere-hours consumed (Ah)State of charge (%)
  • Remaining time at the current rate of discharge until the battery has reached 90% discharge
  • Visual alarm: almost charged, almost discharged

It will also show the following historic values:

  • The depth of the deepest discharge
  • The cumulative number of Amp hours drawn from the battery
  • The minimum battery voltage
  • The maximum battery voltage
  • The minimum cell voltage
  • The maximum cell voltage

The diagnostic data displayed is:

  • Software versions of the system components
  • Total number of automatic system shutdowns, caused by an error
  • Last four errors that occurred in the system

Victron Energy Battery Management System - BMS12/200

BMS012201000

Stock: In Stock!

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

This battery management system is for Victron's lithium batteries.

Specifications

Volts: 12
Length (mm): 260
Width (mm): 120
Height (mm): 65
Weight (kg): 2
Application: Lithium Battery Monitoring
Warranty: 5 Years

Additional Information

BMS 12/200 WITH:

  • 12V 200A load output, short-circuit proof
  • Li-ion battery over-discharge protection
  • Starter battery discharge protection
  • Adjustable alternator current limit
  • Remote on-off switch

Victron Energy Smart Battery Protection - VBP48-100

BPR048100400

Stock: In Stock!

RRP $236.50

$212.85

Estimate Shipping Cost

Quantity

Postcode

Description

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which could damage the battery).

Specifications

Volts: 48
Length (mm): 123
Width (mm): 120
Height (mm): 62
Weight (kg): 1
Application: Battery Protection
Warranty: 5 Years

Additional Information

24-64VDC BatteryProtect 48V 100A

The BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages.
The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries
In this mode the Battery Protect can be controlled by the VE.Bus BMS.

Ultra-low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.
Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64 V.

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Victron Energy Smart Battery Protection - VBP-220

BPR000220400

Stock: In Stock!

RRP $173.80

$156.42

Estimate Shipping Cost

Quantity

Postcode

Description

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which could damage the battery).

Specifications

Volts: 12/24
Length (mm): 123
Width (mm): 120
Height (mm): 62
Weight (kg): 1
Application: Battery Protection
Warranty: 5 Years

Additional Information

2/24V auto ranging
The BatteryProtect automatically detects system voltage 

Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages. 
The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries
In this mode the Battery Protect can be controlled by the VE.Bus BMS.
Note: the Battery Protect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.

Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V. 

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage

Victron Energy Smart Battery Protector - VBP-100

BPR000100400

Stock: In Stock!

RRP $105.60

$95.04

Estimate Shipping Cost

Quantity

Postcode

Description

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which could damage the battery).

Specifications

Volts: 12/24
Length (mm): 115
Width (mm): 42
Height (mm): 59
Weight (kg): 0.75
Application: Battery Protection
Warranty: 5 Years

Additional Information

12/24V auto ranging
The BatteryProtect automatically detects system voltage 

Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages. 
The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries
In this mode the Battery Protect can be controlled by the VE.Bus BMS.
Note: the Battery Protect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.

Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V. 

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage

Victron Energy Smart Battery Protector - VBP-65

BPR000065400

Stock: In Stock!

RRP $71.50

$64.35

Estimate Shipping Cost

Quantity

Postcode

Description

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which could damage the battery).

Specifications

Volts: 12/24
Length (mm): 106
Width (mm): 48
Height (mm): 40
Weight (kg): 0.25
Application: Battery Protection
Warranty: 5 Years

Additional Information

12/24V auto ranging
The BatteryProtect automatically detects system voltage 

Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages. 
The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries
In this mode the Battery Protect can be controlled by the VE.Bus BMS.
Note: the Battery Protect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.

Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V. 

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage

Victron Energy Venus-GX Systems Controller & Monitor

BPP900400100

Stock: In Stock!

RRP $526.90

$474.21

Estimate Shipping Cost

Quantity

Postcode

Description

Venus GX
The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more.

VRM Online Portal
All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an impression, try the demo on https://vrm.victronenergy.com

Remote Console on VRM
The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.

Automatic genset start/stop
A highly customizable start/stop system. Use state of charge, voltage, load and other parameters.
Define a special set of rules for quiet times, and optionally a monthly test run.

The heart of ESS - Energy Storage System
The Venus GX is the Energy Manager in an ESS system. More information in the ESS manual:
https://www.victronenergy.com/live/ess:design-installation-manual

Data logging
When connected to the internet, all data is sent to the VRM Portal. When there is no internet connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or
offline converted with the VictronConnect app, for analysis.

Specifications

Length (mm): 143
Width (mm): 96
Height (mm): 45
Weight (kg): 0.5
Application: Systems Monitoring
Warranty: 5 Years

Additional Information

Supported products

  • Multis and Quattros, including split-phase and three-phase systems. Monitoring and control (on/off and current limiter). Changing configuration is possible (only remotely via the internet, not without an internet connection)
  • BlueSolar MPPT Solar Chargers with a VE.Direct port
  • BlueSolar MPPT 150/70 and the MPPT 150/85 with VE.Can port. When multiple BlueSolar MPPTs with VE.Can are used in parallel, the all information is combined as one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers
  • BMV-700 family can be connected directly to the VE.Direct ports on the Venus GX. Use the VE.Direct Cable for this
  • BMV-600 family can be connected to the VE.Direct ports on the Venus GX. Requires an accessory cable
  • Lynx Ion + Shunt
  • Lynx Ion BMS
  • Lynx Shunt VE.Can
  • Skylla-i battery chargers
  • NMEA2000 tank sensors
  • A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking purposes. The map on VRM will show the latest position
  • Fronius PV Inverters

When more than two VE.Direct products must be connected, USB can be used.

Internet connection
The Venus GX can be connected to internet with an Ethernet cable and via Wi-Fi. The Venus GX has no internal cellular modem: there is no slot for a sim-card. Use an off-the-shelf GPRS or 3G router instead. See the blog post about 3G routers.

Tank level inputs
The tank level inputs are resistive: connect them to a resistive tank sender. Such tank senders are not supplied by Victron. The tank level ports can each be configured to work with either European tank senders (0 - 180 Ohm), or US (240 - 30 Ohm).

Victron Energy Battery Alarm GX

BPA000100010R

Stock: In Stock!

RRP $123.20

$110.88

Estimate Shipping Cost

Quantity

Postcode

Description

The Battery Alarm GX is a small and low cost alarm panel which monitors your battery bank.

It features both audible and visual alarms, as well as a potential free contact with normally open and normally closed contacts.

Alarm thresholds and hysteresis are programmable by DIP switches.

Specifications

Volts: 12/24
Length (mm): 120
Width (mm): 65
Height (mm): 40
Weight (kg): 0.25
Application: Battery Monitoring
Warranty: 5 Years

Victron Energy Smart Battery Monitor with midpoint monitoring BMV-712 Smart

BMV-712 Smart

Stock: In Stock!

RRP $368.50

$331.65

Estimate Shipping Cost

Quantity

Postcode

Description

Bluetooth inside

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.

Download the Victron Bluetooth app

Use a smartphone or other Bluetooth enabled device to:

  • customize settings
  • monitor all important data on single screen
  • view historical data
  • update the software when new features become available

Easy to install

All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed.

Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting.

Midpoint voltage monitoring

One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information.

Very low current draw from the battery

Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days.

Bi-stable alarm relay

Prevents increased current draw in case of an alarm.

Specifications

Weight (kg): 0.5
Application: Battery Monitoring
Warranty: 5 Years

Additional Information

  • Battery voltage, current, power, ampere-hours consumed and state of charge
  • Remaining time at the current rate of discharge
  • Programmable visual and audible alarm
  • Programmable relay, to turn off non critical loads or to run a generator when needed
  • 500 Amp quick connect shunt and connection kit
  • Shunt selection capability up to 10.000 Amps
  • VE.Direct communication port
  • Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
  • Wide input voltage range: 6,5 – 70V
  • High current measurement resolution: 10 mA (0,01A)
  • Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings

Enerdrive ePro+ Battery Monitor - EN55050

EN55050

Stock: In Stock!

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C). Supports up to three battery banks (12V, 24V and 48V).

Shunt dimensions: Footprint 100 x 100mm
Base height 24.0mm
Total height 64.5mm
Weight 290grams

Display dimensions: Front panel Ø 64.0mm
Body diameter Ø 51.5mm
Total depth 36.0mm
Weight 70grams

Specifications

Weight (kg): 1
Application: Battery Monitor
Warranty: 2 Years

Additional Information

The ePRO PLUS is the latest generation, highly advanced battery monitor from Enerdrive. It consists of an intelligent shunt and a remote control display unit. The shunt has a Grid Optimized footprint for perfect integration with our DC Modular products.

This advanced battery monitor not only shows the true state of charge of your battery system. It also offers a large amount of additional features to optimally supervise your battery system and control external equipment. The ePRO PLUS is compatible with lead based and Lithium batteries (LiFePO4).

The ePRO PLUS can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be configured for other purposes, like mid-point voltage measurement, keyswitch input, setup lock or backlight control. The ePRO PLUS battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to 70Vdc. So any lead- or lithium based battery from 12V up to 48V can be monitored.

The installation time is minimal, requiring only one supply wire to the intelligent shunt base and a single ‘QuickLink’ cable between the shunt base and the control/display unit (CDU). Additionally, the battery minus cable must be interrupted in order to insert the shunt into the high current circuit. The fused supply wire and the QuickLink cable are both included in the package, avoiding the need for a separate connection kit.

Victron Energy Smart Battery Sense

SBS050100200

Stock: In Stock!

RRP $52.80

$47.52

Estimate Shipping Cost

Quantity

Postcode

Description

Voltage and temperature measurement

Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT solar chargers. When measuring voltage and temperature, charging of batteries will improve, which increases charging efficiency and prolongs battery life. Suitable for lead and for lithium batteries.


Improves battery charge

By measuring voltage at the battery terminals, voltage loss is avoided due to conductivity resistance, thus ensuring correct charging voltage. In the case of lead batteries, data from the battery temperature are used to adjust the charging voltage values: cold batteries require higher charging voltage while hot batteries require lower charging voltage. When looking forward to lithium batteries, data from the battery temperature is used to disable charging when the batteries are too cold: charging lithium batteries at or below freezing causes permanent damage to the cells.


See - no wires

The connection between Smart Battery Sense and one or more solar chargers is wireless: It uses VE.Smart Network - a wireless technology based on Bluetooth Smart. Transferred data can be used simultaneously by one, two or more solar chargers connected to the same 12V, 24V or 48V battery. The intelligent network is configured using the VictronConnect app. 


Simple, setup, easy to use

The installation is simple, fast and uncomplicated. All you have to do is connect the two terminals of the device to the battery terminals and then the Smart Battery Sense device directly to the battery using self-adhesive tape. 

Specifications

Weight (kg): 0.5
Warranty: 5 Years

Additional Information

Introducing the VE.Smart Network

A VE.Smart Network is a wireless network which allows a number of Victron products to exchange information. It is a wireless technology using Bluetooth Smart.

Use VE.Smart to add remote voltage- and temperature- sensing to your Victron MPPT Solar Chargers. Connect the new Smart Battery Sense, to a Solar Charger. The Solar Charger will receive battery voltage & temperature information, and use that data to optimize its charge parameters. This will improve charging-efficiency and prolong battery life.

Redarc 24V 20A In-Vehicle Battery Charger BCDC2420-LV

BCDC2420-LV

Stock: In Stock!

RRP $768.00

$691.20

Estimate Shipping Cost

Quantity

Postcode

Description

The REDARC BCDC2420 In-vehicle battery charger is a 24 Volt 20 Amp, three stage DC DC charger that operates from a vehicle input between 9 and 32 Volts DC. It is designed to charge any commonly used automotive 24V battery system to an optimal level with chemistry specific battery charging algorithms.

For use with vehicles fitted with low voltage smart/variable voltage alternators.

Specifications

Length (mm): 150
Width (mm): 120
Height (mm): 37
Weight (kg): 1
Warranty: 2 Years

Additional Information

The BCDC2420 features a multi-stage charging algorithm, with a 24V charging output the DC to DC charger is perfectly suited to trucking applications such as charging battery banks for tailgate lifters and side curtains.

The BCDC2420 features a MPPT Solar Regulator, which means 12V solar panels can be used to charge your 24V auxiliary batteries. The MPPT Solar charging algorithm extracts the maximum available power from your solar panels at any given time.

Compact in size and fully sealed - water, dust and vibration are no match for this in-vehicle battery charger. Featuring fan free cooling, there is no noise or wearing parts, eliminating any risk of dust getting into the unit. A higher operating temperature allows for flexible installation options, from the engine bay to inside a trailer.

Manufacturer Information

Redarc Dual Input 50A In-Vehicle DC Battery Charger BCDC1250D

BCDC1250D

Stock: In Stock!

RRP $778.00

$699.00

Estimate Shipping Cost

Quantity

Postcode

Description

The REDARC BCDC1250D is a 12V 50A In-vehicle DC to DC battery charger. It features the next generation in REDARC In-vehicle charging technology, charging from Solar and DC inputs simultaneously.

Specifications

Volts: 12
Length (mm): 165
Width (mm): 120
Height (mm): 37
Weight (kg): 1
Warranty: 2 Years

Additional Information

The REDARC BCDC1250D In-vehicle Battery Charger is the next generation in REDARC's DC to DC charging technology, with additional features that make it one of the most advanced dual battery chargers on the market.

Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1250D will charge from both solar and the alternator simultaneously. And, with built in 'Green Power Priority' it will select solar charging first, meaning less load on the alternator.

Suitable for 12 or 24 volt vehicle systems, the unit will also work with either standard or variable/smart alternators.

The BCDC1250D features patented charging profiles along with a new lithium charging profile making the unit suitable for charging AGM, Gel, Standard Lead Acid, Calcium and LiFePO4 batteries.

Features

Separate DC and solar charging inputs
Maximises the performance and life of your auxiliary battery
Simultaneous DC and solar charging with Green Power Priority
Suits 12V/24V standard and variable voltage/smart alternators
Suitable for AGM, GEL, standard lead acid, calcium and LiFePO4 batteries

Manufacturer Information

Panasonic Eneloop 4 Bank AAA/AA NiMH Charger w/4x AAs

K-KJ55MCC4TA

Stock: In Stock!

RRP $64.99

$55.48

Estimate Shipping Cost

Quantity

Postcode

Description

Brilliant AAA/AA NiMh quick battery charger and tester in one! Can charger 1, 2, 3, or 4 cells at once - compaired to most cheaper chargers which can only charge 2 or 4 cells at once. Includes 4x AA NiMH rechargeable cells worth RRP $27.99 seperately.

1-4 AA/AAA cell smart quick charger features:

  • Intelligent charging. 
  • Charges 1-4 AA or AAA NiMH cells.
  • World voltage auto detect 100-240VAC input via wall mount plug.
  • Capacity & Battery Life Checker - Discreet charging indicator lights that shine through the front face of the charger displaying battery state of charge %. Each channel's indicator light operates independently of the other channels. RED: ~0-20% YELLOW: ~20-80% GREEN: ~80-100%
  • Individual cell charging control.
  • Peak voltage control.
  • Temperature control/protection.
  • Minus delta voltage detection.
  • Safety timer control.
  • Alkaline battery detection that automatically prevents charging if non-rechargeable alkaline batteries are accidentally inserted.
  • Short circuited cells detection.
  • Can charge AA cells up to 2700mA capacity and AAA cells up to 1000mA. 

Includes 4 x Panasonic BK-3MCCE Eneloop 2100 cycle AA NiMH cells. (worth RRP $27.99 seperately)

Specifications

Length (mm): 105
Width (mm): 65
Height (mm): 27
Weight (kg): 1
Warranty: 1 Year

Additional Information

Charge times:

  • For 2000mAh cells - 1 x AA 75 minutes, 2 x AA 110 minutes, 3-4 x AA 220 minutes.
  • For 800mAh cells - 1 x AAA 65 minutes, 2 x AAA 100 minutes, 3-4 x AAA 200 minutes.
Manufacturer Information

Remco 12V 65Ah Standby AGM

RM12-65

Stock: 2 Days

$244.00

Estimate Shipping Cost

Quantity

Postcode

Description

Specially designed for Standby and Backup Power Supply applications, Remco's Standby range are the ideal replacement solution for Home Alarms, Backup & Emergency Lighting, Children's Ride-On Toys, etc.

Specifications

Volts: 12
Ah: 65
Length (mm): 350
Width (mm): 166
Height (mm): 174
Weight (kg): 33
Application: Standby/UPS
Warranty: 1 Year

Remco 12V 100Ah Standby AGM FR

RM12-100FR

Stock: 1 Day

$372.00

Estimate Shipping Cost

Quantity

Postcode

Description

Remco FR Series batteries have the same internal design features as the General Purpose/Standby Series, but with the added safety in service of a case conforming to the higher Fire Rating Standard UL94-VO.

Specifications

Volts: 12
Ah: 100
Length (mm): 304
Width (mm): 165
Height (mm): 208
Weight (kg): 29.7
Application: Standby/UPS
Warranty: 1 Year

Remco 12V 80Ah Standby AGM FR

RM12-80FR

Stock: 1 Day

$320.00

Estimate Shipping Cost

Quantity

Postcode

Description

Remco FR Series batteries have the same internal design features as the General Purpose/Standby Series, but with the added safety in service of a case conforming to the higher Fire Rating Standard UL94-VO.

Specifications

Volts: 12
Ah: 80
Length (mm): 260
Width (mm): 169
Height (mm): 208
Weight (kg): 24.8
Application: Standby/UPS
Warranty: 1 Year

Remco 12V 40Ah Standby AGM FR

RM12-40FR

Stock: 1 Day

$180.00

Estimate Shipping Cost

Quantity

Postcode

Description

Remco FR Series batteries have the same internal design features as the General Purpose/Standby Series, but with the added safety in service of a case conforming to the higher Fire Rating Standard UL94-VO.

Specifications

Volts: 12
Ah: 40
Length (mm): 198
Width (mm): 164
Height (mm): 171
Weight (kg): 14.3
Application: Standby/UPS
Warranty: 1 Year

Remco 12V 33Ah Mobility Deep Cycle AGM

RM12-33DCM

Stock: 1 Day

$160.00

Estimate Shipping Cost

Quantity

Postcode

Description

Purpose Built to handle the demanding requirements of repeated deep cycle use, the REMCO Deep Cycle range are the ideal replacement solution for applications such as Recreational,Mobility, Communications, Marine & RV use, Etc.

Specifications

Volts: 12
Ah: 33
Length (mm): 195
Width (mm): 130
Height (mm): 181
Weight (kg): 10.6
Application: Mobility Deep Cycle
Warranty: 1 Year

Remco 12V 20Ah Mobility Deep Cycle AGM

RM12-20DCM

Stock: 1 Day

$84.00

Estimate Shipping Cost

Quantity

Postcode

Description

Purpose Built to handle the demanding requirements of repeated deep cycle use, the REMCO Deep Cycle range are the ideal replacement solution for applications such as Recreational,Mobility, Communications, Marine & RV use, Etc.

Specifications

Volts: 12
Ah: 20
Length (mm): 182
Width (mm): 76
Height (mm): 167
Weight (kg): 5.6
Application: Mobility Deep Cycle
Warranty: 1 Year

Remco 12V 65Ah Deep Cycle AGM

RM12-65DC

Stock: 2 Days

$284.00

Estimate Shipping Cost

Quantity

Postcode

Description

Purpose Built to handle the demanding requirements of repeated deep cycle use, the REMCO Deep Cycle range are the ideal replacement solution for applications such as Recreational,Mobility, Communications, Marine & RV use, Etc.

Specifications

Volts: 12
Ah: 65
Length (mm): 350
Width (mm): 166
Height (mm): 174
Weight (kg): 33
Application: Deep Cycle
Warranty: 1 Year

Remco 12V 26Ah Deep Cycle AGM

RM12-26DC

Stock: 1 Day

$117.00

Estimate Shipping Cost

Quantity

Postcode

Description

Purpose Built to handle the demanding requirements of repeated deep cycle use, the REMCO Deep Cycle range are the ideal replacement solution for applications such as Recreational,Mobility, Communications, Marine & RV use, Etc.

Specifications

Volts: 12
Ah: 26
Length (mm): 175
Width (mm): 165
Height (mm): 125
Weight (kg): 9.3
Application: Deep Cycle
Warranty: 1 Year

Victron Energy Battery Balancer

BBA000100100

Stock: In Stock!

RRP $117.70

$105.93

Estimate Shipping Cost

Quantity

Postcode

Description

The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.

When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge.

Specifications

Volts: 24
Length (mm): 113
Width (mm): 100
Height (mm): 47
Weight (kg): 1
Application: Series Battery Applications
Warranty: 5 Years

Additional Information

If needed, several balancers can be paralleled.
A 48V battery bank can be balanced with three Battery Balancers.

http://www.victronenergy.com.au/upload/documents/Datasheet-Battery-Balancer-EN.pdf

Xtar MC6II Battery Charger

MC6II

Stock: 2 Days

RRP $49.95

$44.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR MC6II QUEEN ANTII is a six channel (1-6 cells) fully automatic lithium ion battery charger features:

Six cell charger for charging 3.6V/3.7V lithium ion cell in sizes 

  • 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18500, 18650, 18700, 20700, 21700

Powered via included wall adaptor

  • Input: 5VDC 3.0A
  • Output (Constant Current): 6 x 0.5A
  • Cut-off voltage 4.2V (±0.05V)
  • Cut-off current 50mA±10mA
  • Sliding contacts for firm contact with battery during charging 
  • LED charging indicators per channel: 
  • RED: Charging / Activating / Short circuit
  • GREEN: Charging complete / Slot vacant / Poor contact
  • 0V discharged cell wake-up function
  • IC Temperature monitoring and heat dissipation design for 15°C max. rise. Flame retardant material.
  • Overheat protection, overheat protection, reverse polarity and short circuit protection.


MC6II package includes:

  • MC6II charger
  • Wall adaptor
  • Manual and warranty card

Specifications

Length (mm): 128
Width (mm): 140
Height (mm): 31
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Xtar MC6 Battery Charger

MC6

Stock: 2 Days

RRP $49.95

$44.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR MC6 QUEEN ANT is a six channel (1-6 cells) fully automatic lithium ion battery charger. Powered by the included 5VDC input USB cable the charger includes the following features:

Six cell charger for charging 3.6V/3.7V lithium ion cell in sizes 

  • Channels 2-5: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18500, 18650, 18700, 22650, 25500, 26650, 
  • Channels 1 and 6: Flat 32650.

Powered via USB input (includes 2 x USB cables)

  • USB input 1 provides power to channels 1 and 6
  • USB input 2 provides power to channels 2-5

Auto selects Charging Current:

  • CH1 and CH6 = 1.0A or 0.5A (low power)
  • CH2 - CH 5 = 0.5A or 0.2A (low power)

MC6 automatically reduces charging current to low power if power supply is insufficient

  • Connect USB input 1 and USB input 2 to charge up 6 cells simultaneously thanks to independent charging channels
  • Sliding contacts for firm contact with battery during charging 
  • LCD display shows charging status and charging current indicators per channel
  • 0V discharged cell wake-up function
  • IC Temperature monitoring and heat dissipation design for 15°C max. rise.
  • Cut-off voltage 4.2V (±0.05V) cut-off current ≤120mA.
  • Overheat protection, reverse polarity and short circuit protection.


MC6 package includes:

  • MC6 charger
  • 2 x USB cable
  • Manual and warranty card 

Specifications

Length (mm): 134
Width (mm): 111
Height (mm): 38
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Xtar MC4 Battery Charger

MC4

Stock: 2 Days

RRP $39.95

$35.96

Estimate Shipping Cost

Quantity

Postcode

Description

XTAR MC4 four channel (1-4 cells) fully automatic lithium ion battery charger. Powered by the included 5VDC input USB cable and AC wall adaptor.

Features:

  • Four cell charger for charging 3.6V/3.7V lithium ion cell in sizes 
  • Channels 1 and 4: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650.
  • Channels 2 and 3: 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18500, 18650, 18700, 20700, 21700.
  • Powered via USB input (cable included). Use with 5V 2.1A USB adaptor for optimum performance.
  • Sliding contacts for firm contact with battery during charging 
  • LED charging status and charging current indicators per channel
  • 0V discharged cell wake-up function
  • IC Temperature monitoring and heat dissipation design for 15°C max. rise.
  • Cut-off voltage 4.2V (±0.05V) cut-off current ≤120mA.
  • Overheat protection, reverse polarity and short circuit protection.

Auto selects Charging Current:

  • All channels in use = 0.5A
  • CH1 and CH4 in use = 1.0A

Specifications

Length (mm): 100
Width (mm): 97
Height (mm): 27
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Additional Information

MC4 package includes:

  • MC4 charger
  • AC wall adaptor
  • USB cable
  • Manual and warranty card 

Xtar MC2 Battery Charger

MC2

Stock: 2 Days

RRP $16.95

$15.26

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR MC2 is a two channel (1-2 cells) fully automatic lithium ion battery charger. Powered by the included 5VDC input USB cable the charger includes the following features:

  • Two cell charger for charging one or two 3.6V/3.7V lithium ion cell in sizes 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 26650.
  • Sliding contacts for firm contact with battery during charging and LED status indicators per channel.
  • Algorithm based 3 stage TC/CC/CV charging system with 0V discharged cell wake-up function, soft charge start followed by constant current then constant voltage charging.
  • Reverse polarity, short circuit & overcharge protection.
  • IC Temperature monitoring.
  • Compact, low heat design with fireproof ABS material.
  • Overheat protection, reverse polarity and short circuit protection.
  • 2 year repair warranty (when used according to specification & in normal conditions).

Intelligently adjusts current options depending on input power: 

  • CC (constant current stage) charging rate with 5V 1.0A input = 500mA (±10mA). 
  • CC (constant current stage) charging rate with 5V 0.5A input = 250mA (±10mA).
  • CV (constant voltage charging stage) 4.2V (±0.05V) cut-off current <40mA.

Specifications

Length (mm): 92
Width (mm): 40
Height (mm): 32
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Additional Information

MC2 package includes:

  • MC2 charger
  • USB cable
  • Manual and warranty card 

Xtar MC1 Plus - Battery Charger

MC1 Plus

Stock: 2 Days

RRP $16.95

$15.26

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR MC1 Plus ANT is a single channel (1 cell) fully automatic lithium ion battery charger with 1A max constant current. Powered by the included 5VDC input USB cable the charger includes the following features:

  • Single cell charger for charging one 3.6V/3.7V lithium ion cell in sizes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500, 26650.
  • Algorithm based 3 stage TC/CC/CV charging system with 0V discharged cell wake-up function, soft charge start followed by constant current then constant voltage charging.
  • Reverse polarity, short circuit & overcharge protection.
  • Automatic charge current selection; 0.5A, 1.0A.
  • Precise cut-off voltage at 4.20V.
  • Automatic shut off and restart keeps the battery fully charged without damaging it.
  • 2 year repair warranty (when used according to specification & in normal conditions)

Specifications

Length (mm): 92
Width (mm): 27
Height (mm): 26
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Xtar MC1 Charger

MC1

Stock: 2 Days

RRP $10.95

$9.86

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR MC1 is a single channel (1 cell) fully automatic lithium ion battery charger. Powered by the included 5VDC input USB cable the charger includes the following features:

  • Single cell charger for charging one 3.6V/3.7V lithium ion cell in sizes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 22650, 25500, 26650
  • Algorithm based 3 stage TC/CC/CV charging system with 0V discharged cell wake-up function, soft charge start followed by constant current then constant voltage charging.
  • Reverse polarity, short circuit & overcharge protection.
  • IC Temperature monitoring.
  • CC (constant current stage) charging rate 500mA (+/-10mA). CV (constant voltage charging stage) 4.2V (+/-0.05V) cut-off current <40mA
  • 2 year repair warranty (when used according to specification & in normal conditions)

Specifications

Length (mm): 92
Width (mm): 22
Height (mm): 26
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Xtar XP4 Full Set Battery Charger

XP4 Full Set

Stock: 2 Days

RRP $55.95

$50.36

Estimate Shipping Cost

Quantity

Postcode

Description

Professional Li-ion/Ni-MH battery charger with four independant channels featuring three optional charging current (0.25A / 0.5A / 1.0A)

  • Can charge up to four 10440/14500/14650/16340/17500/17670/18350/18500/18650/18700 or up to two 22650/25500/26650 3.6V/3.7V Li-ion batteries
  • Can charge up to four AAA/AA/A size Ni-MH batteries or up to 2 SC/C Ni-MH batteries

For different types of batteries the XP4 adopts different charging methods:

  • For lithium ion batteries, XP4 adopts three-stage charging (TC, CC, CV)
  • For Ni-MH batteries, XP4 adopts pulse charging and 0△V,-△V judge method plus stopping charging when overtime and over voltage function

Charging Parameters:

  • Lithium batteries charging parameter: Input Power 12.0V DC/2.0A 0.25A CC Current 250±30mA 0.50A CC Current 500±50mA 1.0A CC Current 1000±80mA Cut-Off Voltage 4.2±0.05V USB Output Voltage 5.0±0.3V USB Output Current ≤1.0A 0.25A/0.5A cut-off current/TC current ≤60mA 1.0A cut-off current/TC current ≤100 mA Operation Temperature 0-40℃
  • Ni-MH batteries charging parameter: Input 12V DC/2.0A 0.25A Pulse charging current 250±30mA 0.5A Pulse charging current 500±50mA 1.0A Pulse charging current 1000±80mA Cut-off voltage 1.4±0.05 V Operation Temperature 0-40 ℃

Specifications

Length (mm): 124
Width (mm): 92
Height (mm): 35
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Additional Information

  • 12VDC input via 100-240VAC input Australian approved AC Adaptor or 12/24VDC car adaptor
  • Soft-start current to avoid damaging batteries
  • High heat dissipation design
  • Made using fire resistant ABS shell
  • 0V low battery activation
  • Reverse polarity protection and short circuit protection
  • Battery chemistry type recognition
  • For Ni-MH batteries, XP4 has the discharge function to repair the battery capacity
  • Features a built-in USB 1.0A output from Channel 4 when loaded with a charged Li-Ion battery for powerbank use. USB output has overload, short circuit, overheat and reverse-polarity protection plus stopping supplying when the battery has low voltage
  • Adopts PWM technology to control the high efficiency DC-DC circuit, lowers the voltage and reduce energy loss
  • 8 x LED display indicators
  • 2 year warranty

Note: Batteries sold separately.

Xtar VP4 Full Set Battery Charger

VP4 Full Set

Stock: 2 Days

RRP $76.95

$69.26

Estimate Shipping Cost

Quantity

Postcode

Description

  • Intelligent LiIon battery charger with four independent channels and real time LCD display.
  • Charge up to four 10440, 14500, 14650, 16340, 17670, 18350, 18500, 18650, 18700 or up to two 22650, 25500, 26650 3.6V/3.7V LiIon batteries.

Charging Parameters:

  • Input  DC 12.0V 1.0A     
  • 0.25A Constant Current Output  250mA x 4 
  • 0.5A Constant Current Output  500mA x 4 
  • 1.0A Constant Current Output  1000mA x 2 
  • Cut-off Voltage (Output Voltage)      4.2V

Specifications

Length (mm): 147
Width (mm): 115
Height (mm): 35
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Additional Information

  • Input via included 100-240VAC to 12VDC Australian approved AC adaptor or 12VDC car adaptor.
  • Independent channels with real time high definition LCD display for each channel with 120° viewing angle for improved visibility.
  • Three stage charging: TC-CC-CV.
  • Three charge current options: 0.25A, 0.5A or 1.0A, selected manually or automatically.
  • Soft-start current and automatic shut off (@4.2V) to avoid damaging batteries.
  • 0V low battery activation.
  • Overheat protection as well as effective heat dissipation design and fire resistant PC shell construction.
  • Reverse polarity protection and short circuit protection.
  • LED status indicators.
  • 2 year warranty.

Xtar VP2 Full Set Battery Charger

VP2 Full Set

Stock: 2 Days

RRP $65.95

$59.36

Estimate Shipping Cost

Quantity

Postcode

Description

  • 100-240VAC (World Voltage) / 12VDC input independent channel 2 cell lithium ion battery charger.
  • LCD display with real time individual channel charge indication
  • Low voltage, overload and overheat protection, power indication, stop supplying when low power
  • Comes with SAA, MEPS approved 100-240VAC (world voltage) to 12VDC input power adaptor plus 12VDC input cigarette light connection car plug.
  • Two cell charger for charging one or two 3.2V lithium ion phosphate cells or 3.6V/3.7V/3.8V lithium ion cells in sizes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 22650, 25500, 26650 commonly used in LED torches & other devices.
  • To view the complete range of torch and laser sight batteries we have available please click this link.
  • Selectable charging currents of either 250mA (+/-30mA), 500mA (+/-50mA) or 1000mA - (+/-80mA).
  • Charge re-activation if cell voltage drops below 3.3V (LiFe) 3.9V (LiIon) if cells left in the charger to keep ready for use.
  • Algorithm based TC/CC/CV charging system with reverse polarity & overcharge protection.
  • LED status indications.
  • Real-time status display.
  • Adopts PWM technology to control the high efficiency DC-DC circuit, lower the voltage and reduce energy loss.
  • Three-stage charging and 0V battery activation.
  • USB Output (5.0V/1.0A)If using a battery in the charger to supply USB power the charger protects the battery by terminating power to the USB when battery voltage drops to 3.0V (+/-0.2V).
  • Adopts IC temperature monitor to avoid overheating.
  • Small charge current when start to charge Compact size, portable.
  • Reverse-polarity and short circuit protection circuit.
  • 2 year repair warranty (when used according to specification & in normal conditions).

Specifications

Length (mm): 135
Width (mm): 68
Height (mm): 35
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Xtar SV2 Full Set Battery Charger

SV2 Full Set

Stock: 2 Days

RRP $59.95

$53.96

Estimate Shipping Cost

Quantity

Postcode

Description

XTAR SV2 ROCKET 1-2 Cell Intelligent LiIon battery fast charger with two independent channels and real time LCD display.

  • Charges 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500, 26650, 32650 size 3.6V/3.7V LiIon batteries.
  • Charges AAAA, AAA, AA, A, SC, C, D size NiMH batteries.

Specifications

Length (mm): 118
Width (mm): 74
Height (mm): 38
Weight (kg): 0.5
Application: Battery Charger
Warranty: 2 Years

Additional Information

Features:

  • Input via included 100-240VAC to 12VDC Australian approved AC adaptor or 12VDC car adaptor.
  • Independent channels with real time high definition LCD display for each channel shows charging current, battery voltage and capacity.
  • Intelligently recognise / display / charge NiMH and LiIon batteries at the same time.
  • Three-phase charging (TC-CC-CV) for LiIon.
  • Pulse charging for NiMH.
  • 0V low battery activation.
  • Overheat protection as well as effective heat dissipation design and fire resistant case.
  • Reverse polarity protection and short circuit protection.
  • 2 year warranty.

Four charge current options: 

  • 0.25A, 0.5A or 1.0A for battery life maximisation.
  • 2.0A for fast charging.

Xtar D26 Set - 1000 Lumen - w/battery and charger

D26 Set

Stock: 2 Days

RRP $169.95

$152.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR D26 Whale diving torch is fitted with the high output CREE XM-L U3 LED bulb producing an output of approximately 1000 lumens provides ultra-bright, white, even light with no black spots.

Made with Anodised 6N01 Aircraft Grade Aluminium Alloy the XTAR D26 offers exceptional brightness for its size. This compact torch is practical and efficient for all-purpose use.

Features

  • Output 1000 lumens, 22500 candela, beam range 300 metres
  • Run time up to 48 hours (dependent on battery type & mode setting used)Turbo - 1.8hrs. High 3.6hours. Mid 11 Hours. Low 48 hours
  • Patented lockable side switch operation with 1.5 second hold down to prevent accidental shut-off
  • 4 output modes - Turbo 1000Lm, High 600Lm, Mid 200Lm, Low 60Lm
  • Battery Warning LED indicator: +25% charged - Green, 5-25% Red, less than 5% Red Flashing 
  • IPX8 rated with extreme compression sealing for a depth of up to 100 metres for diving
  • Tripod mountable with industry standard size bolt hole
  • Transverse conductive circuit protects against reverse polarity
  • Gold plated double contact springs to reduce oxidation for good battery connection
  • Compatible with 18500, 18650 18700 and 26650 size lithium ion batteries(18mm diameter batteries use included adaptor tube). We recommend only using batteries with built in circuit protection
  • 155mm long x 46mm (Head diameter) and 33mm (Body diameter).
  • Digitally regulated output - maintains constant brightness
  • Two year warranty
  • This product is a complete set. It comes with MP1S single cell charger complete with SAA / MEPS Australian approved 100-240VAC (world voltage) AC adaptor & 12VDC car adaptor.
  • Battery included is a 3.1Ah 18700 XTAR protected battery manufactured using a premium quality Japanese made Panasonic cell inside. Also includes soft carry bag, lanyard, extra switch, extra O-Ring. 
  • New TB-26650IC40 4000mAh protected battery also suitable (not included, sold separately).

Specifications

Length (mm): 155
Width (mm): 46
Height (mm): 46
Weight (kg): 0.5
Application: Lighting
Warranty: 2 year warranty (not including battery)

Additional Information

Please note whilst 2 x CR123A size batteries will physically fit this product, use of these two cells or two of any other type in this torch WILL damage the bulb as the battery voltage will be too high for the XM-L bulb. Do not use any cells other than those recommended.

Xtar D08 Set - 2000 Lumen - w/battery and charger

D08 Set

Stock: 2 Days

RRP $449.95

$404.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR D08 WALRUS super bright diving torch is the perfect addition to any professional diver's kit. Producing 2000 lumens of ultra bright light in a torch only 15cm long, it's compact yet powerful and waterproof to depths of up to 100m.

Plus, a Colour Rendering Index (CRI) of 95 makes the D08 an ideal lighting source for underwater photographers and videographers to allow more saturated and vibrant colours. Its compact size means a diver can easily attach multiple D08 torches to their setup as desired during any dive.

Made with 6061 Aircraft Grade Aluminium Alloy and premium Type III hard anodised anti-abrasive finish for superior durability.

Features

  • Output 2000 lumens, 395 candela, beam range 40 metres.
  • Run time up to 4.1 hours on high setting.
  • Powered by 4 x 18650/18700 LiIon batteries for exceptionally long runtime.
  • 3 x battery power indicator lights - when the last indicator is flashing, user still has approx. 30 minutes of battery power remaining.
  • 3 mode settings:
  • High (2000 lumens), Low (900 lumens), Red Light (180 lumens), SOS (500 lumens)
  • Red Light Mode: use this mode to illuminate the way without startling marine wildlife
  • Colour Rendering Index (CRI) of 95 helps to bring out incredible vibrant colours in underwater photography and videography.
  • 120° wide beam for maximum illumination and a wide field of view.
  • Two switches for easy operation whether handheld or attached to a rig.
  • Waterproof to a depth of up to 100 metres for diving.
  • Impact resistant to 1.0 metre.
  • Patented technology inside including infrared transmission technology, tail-tightened design and battery power output management technology.
  • Built-in smart temperature control.
  • This product is a complete set. It comes with MC4 four cell charger complete with SAA / MEPS Australian approved 100-240VAC (world voltage) AC adaptor and USB cable. Also included are 4 x 3.5Ah 18650 LiIon XTAR protected batteries. Also includes lanyard, glasses cloth, manual and soft carry case.

Specifications

Length (mm): 150
Width (mm): 59
Height (mm): 59
Weight (kg): 1
Application: Lighting
Warranty: 2 year warranty (not including battery)

Additional Information

Please note whilst 2 x CR123A size batteries will physically fit this product, use of these two cells or two of any other type in this torch WILL damage the bulb as the battery voltage will be too high for the XM-L bulb. Do not use any cells other than those recommended.

Xtar BK12 Set - 600 Lumen - w/battery and charger

BK12 Set

Stock: 2 Days

RRP $159.95

$143.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR BK12 bicycle light is fitted with the latest technology CREE XM-L U2 LED bulb fitted in an OP reflector producing a very high output white even light with a soft wide beam ideal for bike riding.

Made with 6061 Aircraft Grade Aluminium Alloy premium type III hard-anodized anti-abrasive finish the XTAR BK12 offers exceptional brightness for its size.

Features

  • Maximum output 600 lumens, 6800 candela, beam range 165 metres
  • Run time up to 29 hours (dependent on battery type & mode setting used)
  • ANSI Lumens & run times - High 600 lumens, 2.4Hrs. Medium 200 lumens, 8Hrs. Low 60 lumens, 29Hrs. Signal 200 lumens 
  • Waterproof to IPX8 rating. Shockproof with double spring design to avoid mode skipping & short circuits.
  • Streamlined ,low drag lightweight design - 135mm long x 30mm (Head diameter) and 25.5mm (Body diameter). 118grams (exluding battery).
  • Hand adjustable heavy spring loaded tooth locking handlebar mount featuring 360 degrees rotation fitted with inner rubber strips for handlebar & torch rigidity & protection.
  • The torch is fitted by sliding in with the flat sides vertical then turning the torch 90 degrees to lock. No tools required to fit or remove the torch or adjust the torch mount. This feature allows the rider to then take the torch with them to use for other purposes. 
  • Package includes torch (gold colour), battery, bike mount, carry case, AC & DC chargers, USB charging cable, lanyard, extra O-Ring
  • This product is a complete set. It comes with MP1 single cell charger complete with SAA / MEPS Australian approved 100-240VAC (world voltage) AC adaptor & 12VDC car adaptor. Also included is an 3.1Ah 18700 XTAR protected battery manfactured using a premium quality Japanese made Panasonic cell inside.
  • Two year warranty

Specifications

Length (mm): 135
Width (mm): 30
Height (mm): 30
Weight (kg): 0.5
Application: Lighting
Warranty: 2 year warranty (not including battery)

Additional Information

Please note whilst 2 x CR123A size batteries will physically fit this product, use of these two cells or two of any other non approved battery type in this torch WILL damage the bulb as the battery voltage will be too high for the XM-L bulb. Do not use any cells other than those recommended.

Xtar D06-U2 Set B - 820 Lumen - w/battery and charger

D06-U2 Set B

Stock: 2 Days

RRP $149.95

$134.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR D06-U2 diving torch is fitted with the high output CREE XM-L U2 LED bulb producing an output of approximately 820 lumens provides ultra-bright, white, even light with no black spots.

Made with Anodised 6061 Aircraft Grade Aluminium Alloy the XTAR D06 offers exceptional brightness for its size. This compact torch is practical and efficient for all-purpose use.

Features

  • Output 820 lumens, 18300 candela, beam range 270 metres
  • Run time up to 325 hours (dependent on battery type & mode setting used)
  • Magnetic safety slide switch operated
  • IPX8 rated with extreme compression sealing for a depth of up to 100 metres for diving
  • 149mm long x 45mm (Head diameter) and 30mm (Body diameter).
  • Digitally regulated output - maintains constant brightness
  • Two year warranty
  • This product is a complete set. It comes with MP1 single cell charger complete with SAA / MEPS Australian approved 100-240VAC (world voltage) AC adaptor & 12VDC car adaptor. Also included is an 2.6Ah 18700 XTAR protected battery manufactured using a premium quality Japanese made Sanyo cell inside. Also includes carry case, lanyard, extra O-Ring.

Specifications

Length (mm): 149
Width (mm): 45
Height (mm): 45
Weight (kg): 0.5
Application: Lighting
Warranty: 2 year warranty (not including battery)

Additional Information

Please note whilst 2 x CR123A size batteries will physically fit this product, use of these two cells or two of any other type in this torch WILL damage the bulb as the battery voltage will be too high for the XM-L bulb. Do not use any cells other than those recommended.

Xtar TZ20-U2 Set - 820 Lumen - w/battery and charger

TZ20-U2 Set

Stock: 2 Days

RRP $159.95

$143.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR TZ20-U2 Platoon has superseded the TZ20-T6. The TZ20-U2 torch is fitted with the high output CREE XM-L U2 LED bulb producing an output of approximately 820 lumens provides ultra-bright, white, even light with no black spots.

Major improvements to the TZ20-U2 include increases in lumen output, candela rating & beam range. The battery capacity has also been upgraded.

Made from anodised 6061 aircraft grade aluminium alloy the XTAR TZ20 offers exceptional brightness for its size. This compact torch is practical and efficient for all-purpose use.

Features

  • Output 820 lumens, 7700 candela
  • Run time up to 180 hours (dependent on battery type & mode setting used)
  • OP textured reflector, throws beam over 175 metres
  • Toughened ultra-clear glass lens with anti-reflective coating
  • Tactical style with belt clip
  • Anti-roll, slip-resistant body design
  • Tailcap switch with rapid response momentary on/off
  • 5 mode settings - High (100%), Mid (40%), Low (10%), Strobe & SOS with memory function built in
  • 140.5mm long x 34mm (Head diameter) and 25mm (Body diameter).
  • Digitally regulated output - maintains constant brightness
  • Waterproof to IPX8 Standard
  • Powered by 1 x 18650/18700 lithium ion protected battery (included)
  • Weapons mount & remote pressure switch included
  • This product is a complete set. It comes with MC1 single cell charger complete with SAA / MEPS Australian approved 100-240VAC (world voltage) AC adaptor & 12VDC car adaptor. Also included is a 3500mAh 18650 size XTAR (Panasonic cell inside) protected battery, carry case, holster, lanyard, extra switch, extra O-Ring

Specifications

Length (mm): 141
Width (mm): 34
Height (mm): 34
Weight (kg): 0.5
Application: Lighting
Warranty: 2 year warranty (not including battery)

Additional Information

Please note whilst 2 x CR123A size batteries will physically fit this product, use of these two cells or two of any other type in this torch WILL damage the bulb as the battery voltage will be too high for the XM-L bulb. Do not use any cells other than those recommended.

Xtar RC1 Set - 450 Lumen - w/battery and charger

RC1 Set

Stock: 2 Days

RRP $89.95

$80.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR RC1 DARKWALKER torch is fitted with the high output CREE XP-G2 S2 LED bulb producing an output of 450 lumens offering exceptional brightness for its size. This compact torch is practical and efficient for all-purpose use.

Features

  • Output 450 lumens, 13850 candela, beam range 235 metres
  • Run time up to 20 hours (Dependent on battery type & mode setting used)
  • IPX8 rated for water resistance
  • 1.5 metre impact resistance
  • Direct plug-in charging
  • Tailcap switch for mode settings
  • 2 settings: High (450lm) and Low (60lm)
  • USB cable for direct charge input into torch charge socket so no need to remove battery to recharge.
  • Also includes lanyard, extra O-Ring
  • Powered by 1 x 18650 size lithium ion battery (included)

Specifications

Length (mm): 144
Width (mm): 35
Height (mm): 35
Weight (kg): 0.5
Application: Lighting
Warranty: 2 year warranty (not including battery)

Additional Information

Please note whilst 2 x CR123A size batteries will physically fit this product, use of these two cells or two of any other type in this torch WILL damage the bulb as the battery voltage will be too high for the XM-L bulb. Do not use any cells other than those recommended.

Xtar R30 Set A - 1000 Lumen w/battery and charger

R30 Set A

Stock: 2 Days

RRP $159.95

$143.96

Estimate Shipping Cost

Quantity

Postcode

Description

The XTAR R30 torch is fitted with the high output CREE XM-L U2 LED bulb producing an output of 1000 lumens providing ultra-bright, white, even light with no black spots.

Made from durable aircraft grade anodised (6N01) aluminium alloy type III hard-anodized anti-abrasive finish, the XTAR R30 offers exceptional brightness for its size. This compact torch is practical and efficient for all-purpose use.

Features

  • Output 1000 lumens, 18500 candela, beam range 272 metres
  • IPX8 rated for water resistance
  • 1.5 metre impact resistance
  • Direct plug-in charging with 1000mA fast charging current
  • Battery power indicator
  • Press button switch for mode settings with double hit mode for Strobe & SOS and hold down for off mode to prevent accidental turn off
  • 6 settings including Turbo (1000lm), High (400lm), Medium (200lm) and Low (5lm) plus strobe and SOS modes that can be cancelled or recovered at will
  • Approximate run times (using 3100mAh LiIon battery - included battery is 3400mAh): low 350 hours, medium 10.5 hours, high 5.0 hours, turbo 4.4hrs. 
  • USB cable to direct charge input into torch charge socket so no need to remove battery for recharging. Torch features a built in charge management module.
  • Comes with SAA / MEPS Australian approved 100-240VAC (world voltage) AC adaptor & 12VDC car adaptor both with USB input.
  • Also includes carry case, holster, lanyard, extra O-Ring
  • Digitally regulated output - maintains constant brightness
  • Operating voltage range 2.8V~4.2V
  • Powered by 1 x 18650/18700 size 3.4Ah lithium ion battery included in the package
  • 2 year warranty (not including battery)

Specifications

Length (mm): 153
Width (mm): 38
Height (mm): 38
Weight (kg): 0.5
Application: Lighting
Warranty: 2 year warranty (not including battery)

Additional Information

Please note whilst 2 x CR123A size batteries will physically fit this product, use of these two cells or two of any other type in this torch WILL damage the bulb as the battery voltage will be too high for the XM-L bulb. Do not use any cells other than those recommended.

Baintech PowerTop V3 - 100Ah Gel Battery

PowerTop V3

Stock: 2 Days

RRP $750.00

$675.00

Estimate Shipping Cost

Quantity

Postcode

Description

The PowerTop is a dynamic plug-and-play system that features a 12V 100Ah gel battery and built-in three-way charging that makes operation smooth and easy. With charging inputs for AC, DC and solar, you're free to charge anywhere, any time.

Since the PowerTop is completely portable, it's convenient to bring along and setup right at your campsite. That portability also comes in handy when you've got mates that may be keen to borrow this compact, complete power system. With the PowerTop, you're able to connect a range of different devices with different style plugs at the same time. It features a range of inputs, including: 2x ciga sockets, 2x Engel sockets and dual USB.

The plug-and-play design allows you to instantly and effortlessly connect devices with six easy-to-read LED indicators that keep you updated on progress. An in-built voltmeter with a low volt alarm warning and a 20A resettable thermal breaker are two included safety features that help assure operation of the Power Top is as safe as it is hassle-free. The Power Top's anodised aluminium construction also makes it the perfect off-road or campsite companion as its robust design has been purpose built to withstand harsh Australian conditions and deliver the very best results possible when put to the test.

Charge up your battery with AC, DC and Solar inputs. Using universal Anderson plug connectors gives you the flexibility to access power how you want.

Specifications

Volts: 12
Ah: 100
Length (mm): 330
Width (mm): 175
Height (mm): 275
Weight (kg): 32
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Features

  • All in one off the shelf power system
  • 12V 100Ah Gel Battery included
  • Built in AC Charger & AC Power lead
  • 3 Inputs - AC, DC and Solar
  • 2x Ciga Sockets, 2x Engel Sockets and 2x USB Sockets
  • 6.6A AC Charger

Ritar Standby AGM 12V 26Ah - RT12260F1

RT12260F1

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 26
Length (mm): 166
Width (mm): 175
Height (mm): 125
Weight (kg): 8
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 26Ah - RT12260F3

RT12260F3

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 26
Length (mm): 166
Width (mm): 175
Height (mm): 125
Weight (kg): 8
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 22Ah - RT12200

RT12200

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 22
Length (mm): 181
Width (mm): 77
Height (mm): 167
Weight (kg): 6
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 18Ah - RT12180F3

RT12180F3

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 18
Length (mm): 181
Width (mm): 77
Height (mm): 167
Weight (kg): 5
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 18Ah - RT12180F1

RT12180F1

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 18
Length (mm): 181
Width (mm): 77
Height (mm): 167
Weight (kg): 5
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 12Ah - RT12120F2

RT12120F2

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 12
Length (mm): 151
Width (mm): 98
Height (mm): 95
Weight (kg): 4
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 12Ah - RT12120F1

RT12120F1

Stock: 2

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 12
Length (mm): 151
Width (mm): 98
Height (mm): 95
Weight (kg): 4
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 10Ah - RT12100S

RT12100S

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 10
Length (mm): 151
Width (mm): 65
Height (mm): 111
Weight (kg): 3
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 9Ah - RT1290LBF

RT1290LBF

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 9
Length (mm): 151
Width (mm): 65
Height (mm): 94
Weight (kg): 3
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 9Ah - RT1290F2

RT1290F2

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 9
Length (mm): 151
Width (mm): 65
Height (mm): 94
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 8Ah - RT1280F2

RT1280F2

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 8
Length (mm): 151
Width (mm): 65
Height (mm): 94
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 7.2Ah - RT1272F2

RT1272F2

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 7.2
Length (mm): 151
Width (mm): 65
Height (mm): 94
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 7.2Ah - RT1272F1

RT1272F1

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 7.2
Length (mm): 151
Width (mm): 65
Height (mm): 94
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 7.2Ah - RT1272LF2

RT1272LF2

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 7.2
Length (mm): 151
Width (mm): 65
Height (mm): 94
Weight (kg): 3
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 7Ah - RT1270EF1

RT1270EF1

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 7
Length (mm): 151
Width (mm): 65
Height (mm): 94
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 5.5Ah - RT1255F2

RT1255F2

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 5.5
Length (mm): 90
Width (mm): 70
Height (mm): 101
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 5.5Ah - RT1255F1

RT1255F1

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 5.5
Length (mm): 90
Width (mm): 70
Height (mm): 101
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 5Ah - RT1250BHR

RT1250BHR

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 5
Length (mm): 152
Width (mm): 50
Height (mm): 95
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 3.2Ah - RT1232

RT1232

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 3.2
Length (mm): 134
Width (mm): 67
Height (mm): 61
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 2.9Ah - RT1229

RT1229

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 2.9
Length (mm): 80
Width (mm): 56
Height (mm): 99
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 2.3Ah - RT1223

RT1223

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 2.3
Length (mm): 178
Width (mm): 35
Height (mm): 61
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 1.3Ah - RT1213

RT1213

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 12
Ah: 1.3
Length (mm): 97
Width (mm): 43
Height (mm): 52
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 6V 12Ah - RT6120

RT6120

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 6
Ah: 12
Length (mm): 151
Width (mm): 50
Height (mm): 95
Weight (kg): 2
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 6V 8.06Ah - RT680

RT680

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 6
Ah: 8.06
Length (mm): 151
Width (mm): 34
Height (mm): 94
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 6V 5.54Ah - RT655

RT655

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 6
Ah: 5.54
Length (mm): 70
Width (mm): 47
Height (mm): 101
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 6V 4.54Ah - RT645

RT645

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 6
Ah: 4.54
Length (mm): 70
Width (mm): 47
Height (mm): 99
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 6V 3.22Ah - RT632

RT632

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 6
Ah: 3.22
Length (mm): 134
Width (mm): 35
Height (mm): 61
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 6V 1.3Ah - RT613

RT613

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RT series is a general purpose battery with long design life in float service. It meets with IEC and JIS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RT series battery has reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security systems applications.

Specifications

Volts: 6
Ah: 1.3
Length (mm): 97
Width (mm): 24
Height (mm): 52
Weight (kg): 1
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 274Ah - RA12-260

RA12-260

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 274
Length (mm): 520
Width (mm): 268
Height (mm): 220
Weight (kg): 74
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar standby AGM 12V 254Ah - RA12-240

RA12-240

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 254
Length (mm): 522
Width (mm): 240
Height (mm): 219
Weight (kg): 69
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 212Ah - RA12-200

RA12-200

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 212
Length (mm): 522
Width (mm): 240
Height (mm): 219
Weight (kg): 60
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 158.6Ah - RA12-150

RA12-150

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 158.6
Length (mm): 483
Width (mm): 170
Height (mm): 240
Weight (kg): 45
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 116.4Ah - RA12-120S

RA12-120S

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 116.4
Length (mm): 328
Width (mm): 172
Height (mm): 222
Weight (kg): 32
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 105.8Ah - RA12-100S

RA12-100S

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 105.8
Length (mm): 307
Width (mm): 169
Height (mm): 211
Weight (kg): 29
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 79.4Ah - RA12-75

RA12-75

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 79.4
Length (mm): 260
Width (mm): 169
Height (mm): 210
Weight (kg): 24
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 68.8Ah - RA12-65

RA12-65

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 68.8
Length (mm): 350
Width (mm): 167
Height (mm): 180
Weight (kg): 21
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 58.2Ah - RA12-55

RA12-55

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 58.2
Length (mm): 229
Width (mm): 138
Height (mm): 210
Weight (kg): 18
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 47.6Ah - RA12-45

RA12-45

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 47.6
Length (mm): 198
Width (mm): 166
Height (mm): 171
Weight (kg): 14
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar Standby AGM 12V 34Ah - RA12-33

RA12-33

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

RA series is a general purpose battery with longer design life in float service. It meets with IEC, JIS and BS standards. With up-dated AGM valve regulated technology and high purity raw materials, the RA series battery maintains high consistency for better performance and reliable standby service life. It is suitable for UPS/EPS, medical equipment, emergency light and security system applications.

Specifications

Volts: 12
Ah: 34
Length (mm): 195
Width (mm): 130
Height (mm): 163
Weight (kg): 10
Application: Standby/UPS
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 6V 400Ah - RA6-400EV

RA6-400EV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 6
Ah: 400
Length (mm): 295
Width (mm): 178
Height (mm): 404
Weight (kg): 57
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 6V 335Ah - RA6-335EV

RA6-335EV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 6
Ah: 335
Length (mm): 295
Width (mm): 178
Height (mm): 346
Weight (kg): 48
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 6V 225Ah - RA6-225SEV

RA12-225SEV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 6
Ah: 225
Length (mm): 243
Width (mm): 187
Height (mm): 275
Weight (kg): 32
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 6V 225Ah - RA6-225EV

RA6-225EV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 6
Ah: 225
Length (mm): 260
Width (mm): 180
Height (mm): 263
Weight (kg): 32
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 6V 220Ah - RA6-220EV

RA6-220EV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 6
Ah: 220
Length (mm): 306
Width (mm): 169
Height (mm): 220
Weight (kg): 31
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 12V 210Ah - RA12-210EV

RA12-210EV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 12
Ah: 210
Length (mm): 382
Width (mm): 179
Height (mm): 351
Weight (kg): 64
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 12V 145Ah - RA12-145EV

RA12-145EV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 12
Ah: 145
Length (mm): 340
Width (mm): 173
Height (mm): 280
Weight (kg): 43
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 12V 110Ah - RA12-110EV

RA12-110EV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 12
Ah: 110
Length (mm): 328
Width (mm): 172
Height (mm): 222
Weight (kg): 32
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.

Ritar EV Rated Deep Cycle AGM 12V 75Ah - RA12-75EV

RA12-75EV

Stock: 2 Days

Call for best price

Estimate Shipping Cost

Quantity

Postcode

Description

EV (Electric Vehicle) series is specially designed for frequent deep cycle discharge. By using the specially designed active material and strong grids, the EV series sealed lead acid battery offers reliable performance in high load situations and can deliver more than 300 cycles at 100% DOD. Suitable for mobility scooters, electric wheel chairs, golf buggies etc.

Specifications

Volts: 12
Ah: 75
Length (mm): 260
Width (mm): 169
Height (mm): 210
Weight (kg): 24
Application: Deep Cycle
Warranty: 1 Year

Additional Information

Ritar Power is a Sealed Lead Acid (SLA) Battery Company established in May 2002.